Simrad ST90 - Øverland UPC-5000 P Technical Specifications

196
442703/B
ØverlandUPC-5000PTechnicalspecications
TheØverlandUPC-5000Pseriallinesplitterofferstwoseparateinputsandfteen
RS-232andRS-422outputs.
•Powerrequirements:
–Primary+15-30VDC(2W)
–Secondary+15-30VDC(2W)
•InputA(Primary):NMEA0183,RS-232,
RS422,RS484,Currentloop
•InputB(Secondary):NMEA0183,
RS-232,RS422,RS484,Currentloop
•Outputs:
–10xRS-422,(Maximum50mA)
–5xRS-232
Alloutputsfromtheseriallinesplitter
areshortcircuitprotected.
•ForCurrentLoopinput:100ΩParallel
•Installation:Theseriallinesplitteris
ttedwithaDINrailforeasymounting
andreplacement.
•Outlinedimensions:
–Length:128mm
–Width:128mm
–Height:50mm
Note
Thisinformationwascopiedfromthemanufacturer’ sdocumentation.Thetechnical
specicationsmaybechangedwithoutpriornotice.Toensurethatyourinformationis
correct,alwaysconsultthemanufacturer’ sowndocuments.
Relatedtopics
ØverlandUPC-5000PSeriallinesplitterdescription,page195
ØverlandUPC-5000PTechnicalspecications,page196
ØverlandUPC-5000PConnections,page197
ØverlandUPC-5000PDimensions,page198
SimradST90InstallationManual