Simrad ST90 - Setting up the Operating Panel (Mk2)

278
442703/B
WaitwhiletheoperatingsystemandST90programisloadedandstarted.Sincethe
TransceiverUnitisdisconnected,theturn-onsequencewillnotprogressnormally.
Errormessageswillappear.Y oucansafelydisregardthese.Afterapproximately
twoorthreeminutestheuserinterfaceisshown.
10OntheOperatingPanel,pressPower,andkeepitdepressedforafewseconds.
11MakesurethattheProcessorUnitisturnedoff.
Relatedtopics
Settingtoworksummary,page242
TurningontheST90forthersttime,page276
SettinguptheOperatingPanel(Mk2)
TheOperatingPaneloffersallnecessarycontrolfunctionsfornormaloperationofthe
ST90.Beforeitcanbeputtouse,theOperatingPanelmustbeconguredtopermit
EthernetcommunicationbetweenthepanelandtheProcessorUnit.
Prerequisites
TheOperatingPanelisinstalledasspeciedinthismanual.TheST90ProcessorUnitis
turnedon.
Thefollowingspecicitemsarerequiredforthistask.
•Computermouse
•Computerkeyboard
Neithertoolsnorinstrumentsarerequired.
Context
Whensupplied,theOperatingPanelissetupwiththefollowingcommunication
parameters:
•IPaddress:157.237.60.20
•Subnetmask:255.255.255.0
•Gateway:157.237.60.1
TosetuptheEthernetcommunication,youmustdenetheIPaddressforthepanel,and
identifytheProcessorUnitinthepanelsoftware.Thesesettingsallowyoutousemore
thanoneOperatingPanelontheProcessorUnit.Youcanalsocontrolmorethanone
ProcessorUnitfromasingleOperatingPanel.
TheIPandMACaddressesforyourProcessorUnitarecontainedinatextlenamed
IPandMACaddress.txt.Thelecontainstheproductname,IPaddressandMACaddress
inthefollowingformat(example):
SimradST90InstallationManual