Simrad ST90 - Page 281

442703/B
279
ST90
157.237.60.12
AC:1F:6B:1D:42:E6
Ifthetextleismissingyoumustndtheinformationmanually.Wesuggestthatyoudo
this,andcreatethenecessaryfolderandtxtlebefore
youstartthesetupprocess.See
step1intheprocedure.
Note
IftheOperatingPanelfailstoestablishcontactwiththeProcessorUnititwilltime
outandswitchitselfoffaftertwominutes.Whenthishappenstheblueindicatorlight
stopsashing.
Procedure
Ifrequired,locatetheIPandMACaddressesontheETH1Ethernetadapterinthe
ProcessorUnit.
1ObtaintheIPaddress.
TheIPandMACaddressesforyourProcessorUnitarecontainedinatextle
namedIPandMACaddress.txt.Ifthetextleismissingyoumustndthe
informationmanually.
aInthebottom-leftcornerofyourdesktop,selecttheWindows
®
Startbutton.
bOnthemenu,selectSettings.
cObservethattheSettingswindowopens.
dSelectNetwork&Internet.
eSelectChangeadapteroptions.
fSelecttherelevantnetworkadapter,thenright-clickandselectPropertieson
theshort-cutmenu.
gOnthelistofconnections,selectInternetProtocol4(TCP/IPv4),andthen
Properties.
hObservetheIPaddressfortheEthernetadapter.
iWritedowntheinformation.
jCloseallthedialogboxes.
ObtaintheMACaddress.
aInthebottomleftcornerofyourdesktop,selectthelookingglasstosearch
theoperatingsystem.
bType"Command",dothesearch,andopentheCommandPromptwindow.
cTypeipcong/allandpresstheEnterkey.
dObservethe"PhysicalAddress"(MACaddress)fortherelevantEthernet
adapter.
Settingtowork