Simrad ST90 - Page 386

384
442703/B
Procedure
1BoottheProcessorUnitfromtheUSBashdrive.
aConnectamouseandacomputerkeyboardtotheProcessorUnit.
bInsertthebootableUSBashdrive.
UsetheUSBsocketsontherearsideoftheProcessorUnit.Avoidtheblue
USBsockets,asthesedonotsupportthebootfunctionality
cPoweruptheProcessorUnitmanuallyusingtheon/offbutton.
dObservethattheProcessorUnitbootsfromtheUSBashdrive.
IftheProcessorUnitdoesnotstartfromtheUSBashdrive,reboot,andpress
F11toselectbootdevice.
2StarttheAcronisTrueImageprogram.
3Ontherstpage,selectRecover.
4Onthesecondpage,selectBrowseforbackup.
5Locateandselectthebackuple.
Thebackupleisprovidedonthe*.tibformat.
6SelectOK.
7Onthelistofimageles,right-clickontheimage,andselectRecoverinthe
short-cutmenu.
aOnpageChooserecoverymethod,selectRecoverwholedisksandpartitions.
bSelectNext.
cOnpageSelecttheitemstorecover,selectDisk1.
dSelectNext.
eOnpageDiskproperties,selectDisk1.
fSelectNext.
IftheharddiskontheProcessorUnitcontainsdata,aconrmationdialogbox
appearstoremindyouthatalldataontheharddiskwillbelost.
gSelectOK.
hSelectProceed.
iSelectShutdownthecomputerwhenrecoveryiscompleted.
8Waitfortherecoveryprocesstonish.
Oncecompleted,theProcessorUnitisswitchedoff.
9RemovetheUSBashdrive.
10RestarttheProcessorUnit.
SimradST90InstallationManual