98
3 Producing with the knitting machine
Production
Setting the automatic shift change:
1. Call up the "Service" menu from the "Main menu".
2. Call up "Statistics" menu.
3. Call up "Shift counter" window.
4. Call up "Additional function keys".
5. Call up the "Automatic shift change" window.
6. Turn off the switch (1) so tha
t no
checking is carried out during the input
and no error messages are displayed.
7. Set the time.
Tap on the corresponding field and set t
he desired time using the
slider.
8. Activate the checkbox of the desired shift.
9.
Set the time for all the shifts; to do so r
epeat the steps 7 to 8.
10. Confirm entries.
11. Turn on the switch (1).
Th
e entries are automatically checked.
12. Call up "Main menu".
➜ The shift times may not overlap.
➜ The total time is to be 24 hours.
If
the actual working time is less than
24 hours, then an
additional shift that covers the remaining time is to be
determined.
➜ Set the time and the time zone on the knitting ma
chine
if
necessary, see page [474].
To Next Page
Loading...