X35 Monitor Air Seeder Setup
6.7
4. Select the appropriate ECU Type
a. Apollo is the selection for new machines.
Refer to Figure 6.6.
5. Select a template for a Drill. Refer to Figure
6.7.
a. Bourgault - select this for Bourgault units.
If your
drill isn’t on the list or you have
a non-Bourgault drill select a similar drill
and use as a template to modify and match
your drill.
i. Specific Bourgault settings and will
require extra user inputs.
b. Other - will not apply.
Figure 6.6 - Selecting ECU Type
Figure 6.7 - Selecting Template for Drill
To Next Page
Loading...
