X35 Monitor Air Seeder Setup
6.18
7. For Selecting Seeder Manufacturer;
a. From the pop-up menu select the seeder
manufacturer. Refer to Figure 6.24.
b. Select
Bourgault.
Figure 6.24 - Selecting Seeder Manufacturer
g. Section control and Blockage Monitoring
are connected to the same type of ECU:
Apollo EM-24.
i. For these ECUs functions need to be
set.
ii. Refer
to Figure 6.23. For each
Apollo EM-24
ECU select the cell in
the Function column.
Figure 6.23 - ECU Functions
iii. A Pop up menu will be displayed.
iv. For Sectional Control ECU’s select
Section Control/Monitoring. For
Blockage ECU’s select Monitoring
Only.
Select This
To Next Page
Loading...
