Xerox Phaser 790 Documentation

5. Connecting to the network
Xerox Phaser 790
5–5
The illustrations are logical diagrams and are not intended to describe
the physical arrangement (topology) of devices on the network.
A variety of physical arrangements is possible with each logical
arrangement.
If the network uses more than one protocol or more than one type of
workstation, combine the setups listed for each component of your
system. Multiple protocols (illustrated as parallel lines) can run on the
same cable. A solid connection from the printer with an arrow indicates
that other supported network types can be operational at the same
time.
The IPX/SPX and TCP/IP functionality outlined in this section is available on
both Ethernet and Token Ring networks. AppleTalk is supported on Ethernet
only.
The protocols used in these diagrams are illustrated as follows:
IPX (Novell) Parallel
AppleTalk Other
TCP/IP (lpd,
nbt, or http)

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English