Xerox Phaser 790 Documentation

18. Using the Fiery WebTools
Xerox Phaser 790
18–3
Accessing the Fiery WebTools
Open the Internet browser application.
1. Enter the IP address or the DNS name of the Phaser 790 in the
URL line of the browser.
2. If a Log In dialog box is displayed, select Guest and OK.
The Log In dialog box is displayed only if the administrator has
set a password. Guest access is sufficient to use the Status,
WebLink, and WebDownloader WebTools, as described in this
section.
The Fiery WebTools home page is displayed, with the individual
Fiery WebTools listed on the left.
3. To launch one of the Fiery WebTools, select the name of the tool
you want to access.
Move the cursor over the buttons to display information about the
selections.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English