Xerox Phaser 790 Documentation

B. Print options
Xerox Phaser 790
B–12
Duplex
If your Phaser 790 has a duplexing unit for two-sided printing, you can
print with the Duplex Long Edge Binding or Short Edge Binding
settings.
To print two-sided pages using a duplexing unit:
1. Select Print in your application, and locate the Duplex print
option.
The location of Phaser 790 print options varies, depending on the
printer driver you are using.
2. Select one of the Duplex settings:
• Long Edge Binding—Prints the top of the long edge side 1
image on the same edge of the page as the top of the side 2
image. For Portrait documents, this creates a book effect.
For Landscape documents, this creates a landscape effect.
• Short Edge Binding—Prints the top of the side 1 short edge
image on the opposite edge of the page from the top of the
side 2 image. For Portrait documents, this creates a
calendar effect. For Landscape documents, this creates a
book effect.
3. Set other options and select OK.
4. Select Print.
5. Print the job.
The following table shows how the Duplex settings correspond to
printed output:
Long Edge Binding Short Edge Binding
Portrait
Landscape

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English