Xerox Phaser 790 Documentation

8. Setting up the network server
Xerox Phaser 790
8–11
If more than one Phaser 790 printing connection (for example, Print
queue and Hold queue) is published, you may want to create a printer
for each print connection so that you and other users can print to each
queue directly.
Configuring clients of a Windows NT 4.0 or Windows 2000
server
Each client of a Windows NT 4.0 server is already using a network
protocol to communicate with the server. Each client can print to the
Phaser 790 if the printer is shared by a Windows NT 4.0 or Windows
2000 server or workstation. In that case, the client workstation does
not have to use the same network protocol to connect to the Windows
NT 4.0 or Windows 2000 server as the server uses to communicate
with the printer.
1. For Windows NT 4.0 client workstations, before printing, connect
to the print server and select the printer.
2. Right-click the icon and select the Open option.
3. Select Yes to have Windows set up the printer.
After clients have selected the printer, they can choose it from Print
Setup, Page Setup or Print dialog box of their application. Clients can
change printing options for their own job, but printer properties are not
selectable. When a client selects Print, the job is transmitted to the
Windows NT 4.0 or Windows 2000 print server and on to the selected
queue on the Phaser 790. The job is listed in the Print Manager on the
client workstation, and the administrator can track it in the Phaser 790
window in the Print Manager on the Windows NT 4.0 or Windows 2000
print server.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English