Xerox Phaser 790 Documentation

14. Printing from the Windows workstations
Xerox Phaser 790
14–9
Using saved settings (Windows 95/98 and Windows NT 4.0)
Print option settings can be saved on your hard disk so you can easily
load specifically configured settings for a particular job. Settings files
can also be shared over a network, using the Import and Export
features.
Although the user interface differs slightly, the following procedures are the
same for both PostScript and PCL drivers, in Windows 95/98 and Windows
NT 4.0. The following examples show the Windows 95/98 PostScript driver.
This feature is not supported by Windows 2000.
Creating Saved Settings
1. Ensure that the Default Settings are displayed in the Saved
Settings drop-down list.
As soon as you change any settings, the Saved Settings menu
displays Untitled instead of Default Settings.
2. Select the Save current setting button (the disk icon).
3. Enter a Settings Name and select OK.
Loading Saved Settings
1. Ensure that the Default Settings are displayed in the Saved
Settings drop-down list.
2. Select the settings you want to use.
The options are automatically configured with the saved settings.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English