Xerox Phaser 790 Documentation

23. Problem Solving Network Problem Solving
23-42 Xerox Phaser 790
Novell problems during Network Setup
In Network Setup, when you are configuring your IPX (Novell) connection, the
Phaser 790 queries the network for Novell file servers and trees and
temporarily attaches to them. If a guest login is enabled, it will be used. If not,
you will be prompted to log in from the Phaser 790 Printer Control Panel.
If the selected NetWare file server or tree does not have a guest account, or if
the guest account has expired or has been disabled by the NetWare
supervisor, you will be prompted to notify the IPX (Novell) administrator. In
that case, you or the supervisor may perform one of the following actions:
• Enable a guest account on the NetWare server or tree for the purpose of
setup.
• Log in with a different account. At the log in screen, change the default
name (guest) to supervisor or enter another valid login name. When you
are prompted for a password, enter the correct password for the account
you named.
For any Novell error, ensure that:
• The IPX (Novell) network is connected to the Phaser 790. The NetWare
server you are trying to access is running.
• The Novell network has been configured with at least one print server
and queue for the Phaser 790.
• You have the appropriate permissions and login information, including
user name and password, if necessary.
• The Phaser 790 is configured with the correct frame types for
communication with the desired Novell servers.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English