Xerox Phaser 790 Documentation

19. Using Fiery Link
Xerox Phaser 790
19–4
Fiery Link tools
Fiery Link includes the following tools that can be used to monitor a
print job or a connected printer. Selecting the up and down arrows
scrolls through the Tool List and opens each tool in turn in the Fiery
Link window.
Icon Tool If a print job is selected If a server is selected
Status Shows the job status and
number of pages
processed.
Shows the status of the
server, including any error
messages. You can make
an error message disappear
by selecting the Fiery Link
window.
Queue
Position
Shows the number of
jobs ahead of the
selected job in the queue.
Shows the total number of
active jobs queued to print.
File Info Displays the file name,
when it was sent to the
printer, the printer name,
the number of pages, and
number of copies.
Displays the printer name
and connected device, total
number of queued jobs, and
the number of those jobs
sent by the user.
Input Trays
(see below)
Shows paper levels in the
paper trays of the
selected printer
Shows paper levels in all
trays of the printer.
Dry Ink
(see below)
Shows the levels of dry
ink for the selected
printer.
Shows the levels of dry ink
for the printer.
Fiery Info Shows the model name,
amount of memory,
processor, and software
version of the printer.
Shows the model name,
amount of memory,
processor, and software
version of the printer.
Support Lists the contact names
and information for the
printer.
Lists the contact names and
information for the printer.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English