Xerox Phaser 790 Documentation

10. Installing user software in a Windows 2000 environment
Xerox Phaser 790
10–9
Installing the software for TCP/IP and LPR printing
(new installation of Windows 2000)
Before you continue, print a configuration sheet at the printer to obtain
the IP address assigned to the Phaser 790, as well as the Subnet
mask and gateway address, if they are used.
1. Perform steps 1-17 of the procedure Installing the user software
for parallel port printing to install the printer driver.
When installation is complete, the Printers window is displayed
with an icon for the newly installed printer.
2. Right-click the Phaser 790 icon and select Properties to open
the ppd window. Select the Ports tab to display the Printer Ports
window.
3. Select Standard TCP/IP Port and New Port to start the Add
Standard TCP/IP Printer Port Wizard.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English