Xerox Phaser 790 Documentation

8. Setting up the network server
Xerox Phaser 790
8–12
Configuring the server and client workstations for
Fiery WebTools
Fiery WebTools provide access to many printer functions via the
Internet or corporate intranet, providing additional flexibility in remote
management. You can access the Fiery WebTools from a Windows
95/98, Windows 2000, Windows NT 4.0 or Mac OS workstation.
Fiery WebSetup is supported for Windows 95/98, Windows 2000, and
Windows NT 4.0 only.
Setting up Fiery WebTools on the printer
1. In Network Setup, enable TCP/IP.
2. Enter a valid, unique IP Address and Subnet Mask for the printer.
If necessary, enter a Gateway Address.
3. Enable Web Services.
4. In Printer Setup, confirm that the Print Queue is published.
Setting up Fiery WebTools on a client workstation
1. Enable TCP/IP networking.
2. Enter a valid, unique IP Address for the printer and Subnet
Mask for the workstation. If necessary, enter a Gateway
Address.
3. Install an Internet browser that supports the Java language and
frames, such as Internet Explorer 4.x or higher or Netscape
Navigator 4.x or higher.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English