Xerox Phaser 790 Documentation

B. Print options
Xerox Phaser 790
B–3
Print options table
Options and settings
(Default setting underlined)
Description Requirements, constraints,
and information
(Other) Gamma
Printer default/1.0/1.2/1.4/1.6/
1.8/2.0/2.2/2.4/2.6/2.8/3.0
Specify a source gamma value
for printing RGB images,
objects, and text.
Setting this option to Printer
default produces the same
result as the 2.2 setting.
To enable this option, RGB
Source Profile must be set to
Other.
For more information, refer to
Using ColorWise Pro Tools.
This option is not available for
PCL printing.
(Other) Phosphors
Printer default/Hitachi EBU/
Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron
Specify a source phosphors
value for printing RGB images,
objects, and text.
Setting this option to Printer
default produces the same
result as the SMPTE setting.
To enable this option, RGB
Source Profile must be set to
Other.
For more information, refer to
Using ColorWise Pro Tools.
This option is not available for
PCL printing
(Other) White Point
Printer default/5000 K (D50)/
5500 K/6500 K (D65)/7500
K/9300 K
Specify a source white point
value for printing RGB images,
objects, and text
Setting this option to Printer
default produces the same
result as the 5000 K (D50)
setting.
To enable this option, RGB
Source Profile must be set to
Other.
For more information, refer to
Using ColorWise Pro Tools.
This option is not available for
PCL printing

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English