Xerox Phaser 790 Documentation

B. Print options
Xerox Phaser 790
B–4
Black Overprint
Printer default/Off/On
Select Off to print black text
with knockouts.
Select On to overprint black
text.
The Printer default setting
reflects the setting specified
in Printer Setup.
For Windows, select Expert
Color as the Color Mode to
access this option.
If this option is set to On, the
Combine Separations option
must be set to Off.
Setting this option to On
automatically sets the Pure
Black Text/Graphics option to
On.
More information follows this
table.
This option is not available for
PCL printing.
Brightness
Printer default/85% Lightest/
90% Lighter/95% Light/
100% Normal/105% Dark/
110% Darker/115% Darkest
Select 85% for a substantially
lighter image, 115% for a
substantially darker image, or
use one of the settings in
between.
Setting this option to Printer
default produces the same
result as the 100% Normal
setting.
This option is not available for
PCL printing.
Check on Print
On/Off
Select the Finishing print bar
and the Check on Print check
box to print the job and retain
a copy at the printer.
You can proof the print and, if
acceptable, print multiple
copies from the Command
WorkStation without having to
resend it.
CMYK Simulation Method
Quick/Full
Select Quick to utilize
one-dimensional transfer
curves to adjust density output
of individual color channels.
Select Full to utilize four-
dimensional transfer curves,
which adjust for hue as well as
density of individual color
channels.
For Windows, select Expert
Color as the Color Mode to
access this option.
For more information, refer to
Using ColorWise Pro Tools.
This option is not available for
PCL printing.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English