Xerox Phaser 790 Documentation

11. Installing user software in a Windows NT 4.0 environment
Xerox Phaser 790
11–26
Copying printer description files
The User Software CD contains printer description files for popular
Windows applications. Pagemaker 5.0, 6.0,and 6.5 do not support
automatic installation of printer description files from the Printer Control
Panel. To make the Phaser 790 available in the Print and Page Setup
dialog boxes of this application, copy printer description files to the
appropriate location.
1. Insert the User Software CD in your CD-ROM drive. Open the
English\Prntdrvr folder.
2. Copy the printer description file for your printer to the appropriate
location. For PageMaker 5.0 or later, copy the EF3x1P10.ppd to
one of the following locations:
• For PageMaker 5.0--\ALDUS\USENGLSH\PPD4
• For PageMaker 6.0--\PM6\RSRC\USENGLSH\PPD4
• For PageMaker 6.5--\ PM65\RSRC \USENGLSH\PPD4
Installing the ICM profile
The Image Color Matching (ICM) profiles included in the Icm folder on
the User Software CD are for use with ColorWise ProTools. They can
also be used with applications that support ICC standards. For most
ICC aware applications, the files must be installed into a folder named
Color in the System folder. For use with ColorWise Pro Tools, the files
can be copied to a folder of your choice.
Installing the ICM profile on Windows NT 4.0
1. On the User Software CD, open the Icm folder.
2. Copy the profiles to the Windows NT\System32\Color folder.
If a folder named Color does not exist in the System32 folder, create one
and install the profiles into it.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English