Xerox Phaser 790 Documentation

14. Printing from the Windows workstations
Xerox Phaser 790
14–15
Saving files to print at a remote location
If you do not have a Phaser 790 and are preparing final files to take to
a service bureau or other location, select the Print to file checkbox
and OK. Save the file to the appropriate location. For more information
about printing to a file, refer to your Windows or application
documentation.
You can also print to the File port to create a file to download using
WebDownloader.
Setting print options for a job with Windows NT 4.0
You can print from Windows NT 4.0 using the Adobe PostScript printer
driver or PCL printer driver, both of which are included on the User
Software CD.
Once you have installed the Adobe PostScript printer driver and PPD
file or the PCL printer driver and PDD file, you can specify print
options.
The procedures for setting options and printing are different depending
on which printer driver you use.
With the Adobe PostScript printer driver, you can set options on a job-
by-job basis or establish default settings for all jobs printed from your
computer to the Phaser 790.
This section describes configuring print options for Windows NT 4.0
using the PostScript printer driver and the PCL printer driver.
Custom print options available from the PostScript and PCL printer
drivers are described in the chapter Print options.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English