Xerox Phaser 790 Documentation

B. Print options
Xerox Phaser 790
B–2
Print option override hierarchy
Print options can be overridden in the following cases:
• Application settings override the Printer Setup and ColorWise Pro
Tools settings
• Settings made from the Command WorkStation or Fiery
WebSpooler override user printer driver settings
Default settings
In the following table, underlined settings in the Option and settings
column indicate default printer driver settings (PPD/PDD defaults). If
you do not use the printer driver interface to configure a particular
option, the Phaser 790 prints the job with the default setting.
For options that can be configured during Setup from the Control
Panel, Command WorkStation, WebSetup, or ColorWise Pro Tools
selecting Printer default results in a print job that uses the Setup
settings. For options that cannot be configured during Setup, the
Phaser 790 prints the job with a pre-configured printer default setting.
Some options are not supported by various operating system. For
more information, refer to the Requirements, constraints, and
information column.
To review the current Printer Setup defaults, print the Configuration
page from the Command WorkStation or from the Printer Control
Panel.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English