Xerox Phaser 790 Documentation

18. Using the Fiery WebTools
Xerox Phaser 790
18–7
Using WebDownloader
WebDownloader enables you to send PostScript, Encapsulated
PostScript (EPS), PCL, and Portable Document Format (PDF) files to
the printer without first opening the file in an application.
1. Select the WebDownloader button.
2. Select the queue in the Print Connection drop-down menu.
3. You can download files to the direct, print, or hold queue. Files
sent to the print queue are spooled in the printer memory. Files
sent to the hold queue remain in memory until they are moved to
the print queue or are deleted.
4. If you are sending a PDF job, select the PDF check box. If this
checkbox is not selected, the download may cause PS error.
5. Enter the desired number of copies to print. If you want a specific
page range to print, enter the first page and last page of the
range.
6. Select the Browse button to search for the file to download.
Select the file and Open.
7. Select the Send File button.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English