Xerox Phaser 790 Documentation

10. Installing user software in a Windows 2000 environment
Xerox Phaser 790
10–15
Installing the user software for IPX/SPX printing
To print from Windows 2000 workstations over IPX (Novell), you must
first set up IPX/SPX protocols, and then configure the printer by
selecting the IPX port type and entering the settings for the port you
use.
1. Select the Start button, Settings, and Control Panel.
2. Double-click the Network and Dial Up icon to display the
Network and Dial-up Communications screen.
3. Double-click the Local Area Connection icon and select
Properties.
The Local Area Connection Properties screen is displayed.
Ensure that IPX/SPX-compatible Protocol is listed in the network
components section. For additional information, refer to the
Windows 2000 documentation.
4. Double-click the NWLink IPX/SPX/NetBIOS Compatible
Transport Protocol icon.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English