Xerox Phaser 790

25. Technical Data
Xerox Phaser 790 25-3
Print area........
Less than A3 size A3 or Larger 301269a
• Dark gray area = Printable area
• Light gray area = Non-assured print area
• White area = Non-printable area
Electrical specifications
The Phaser 790 operates under the following conditions:
• Single phase
• 100V Input voltage = 100-120V + 10 %
• 220V Input voltage = 220-240 + 10%
• Frequency = 50 Hz + 0.5 Hz, 60 Hz + 0.5 Hz
• Power Saver Mode = 35 Watts consumption
• Copy Mode = 1400 Watts consumption
Emissions
Ozone = In accordance with the BAM (RAL-UZ 85) standard, the DocuColor
does not emit more than 0.01 ppm (parts per million).
Dust = In accordance with the BAM (RAL-UZ 85) standard, the DocuColor
does not emit more than 0.150 mg/m
3
concentration of dust.
BTUs = 4781 per hour
4 mm
4 mm
4 mm
5 mm
297 mm
431.8 mm
320 mm
457.2 mm
5 mm
4 mm