Xerox Phaser 790

11. Installing user software in a Windows NT 4.0 environment
Xerox Phaser 790
11–28
Loading the ICM profile
The ICM printer profile enables RGB-to-CMYK conversions that are
specific to the printer you are using. The following procedure assumes
that you have installed the ICM profiles included on the User Software
CD.
The internal name of an ICM profile may vary slightly from its file name.
1. Launch Photoshop.
2. From the File menu, select Color Settings and CMYK Setup.
3. In the CMYK Setup dialog box, select ICC as the CMYK color
model.
4. Select the profile that corresponds to the printer or the device you
would like to simulate from the Profile drop-down box.
5. Select OK.