Xerox Phaser 790

Loading paper in the paper tray 1. Setting up the Phaser 790
Xerox Phaser 790 1-41
Loading paper in the paper tray
Refer to the Recommended Materials List for details about the paper
requirements for the Phaser 790.
1. From the front of the Printer, pull the paper tray out of the Printer as far
as it will go.
301128A-WOL
0
If you are loading paper in the 2 Tray Feeder paper trays, skip step 2. It is
not necessary to press down on the metal plate in Tray 2 or Tray3.
2. Press down on the metal plate in the tray until it latches.
301066B-WOL
0