Xerox Phaser 790 Documentation

13. Installing the Fiery software for Windows and Macintosh
Xerox Phaser 790
13–21
Downloading Installers with Fiery WebTools
Fiery WebTools allow you to manage your printer remotely from the
Internet or intranet for your company. The Fiery WebTools software
has its own home page from which you can select from a variety of
functions, including Status, WebSpooler, WebLink, Installer, Web
Downloader, WebSetup and Font Manager.
WebSetup is not supported on Mac OS.
For more information about using Fiery WebTools, refer to the chapter
Introduction to the Command WorkStation.
Setting up Fiery WebTools
In order for network users to access and use Fiery WebTools, you
need to set certain printer options in Network Setup and Printer Setup.
You also must prepare each user workstation to communicate with the
printer over the Internet or intranet.
Setting up Fiery WebTools on the printer
1. In Network Setup>Port Setup>Ethernet Port Setup, set Enable
Ethernet to Yes.
2. In Network Setup>TCP/IP Ethernet Setup, set Enable TCP/IP
to Yes.
3. In Network Setup>Network Service Setup>Web Services
Setup, set Enable Web Services to Yes.
4. Exit Network Setup and select OK to save changes.
5. Exit Printer Setup and select OK to save changes.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English