7. Performing the setup from the Printer Control Panel
Xerox Phaser 790
7–2
3. Perform one of the following:
• To advance through the menus, press the Menu button.
• To view submenus, press the Item/Enter button.
• To accept a displayed option, press the Item/Enter button.
Top-level menus
When the printer is not processing or printing a job, the control panel
displays Ready or Power Saver Mode. To view the top-level menu
choices, including the following, press the Menu button.
Select To specify
System Setup System settings for the printer; set or change the
administrator password used to limit access to the
Setup menus.
Printer Setup Printer settings
PS Setup PostScript settings for the printer
PCL Setup PCL settings for the printer
I/O Port Setup Settings for the network and/or parallel connections to
the printer
Network Protocol Setup Settings for the network protocols
Network Services Setup Settings for the printing services
Check and Print Print remaining copies or processed jobs stored on the
printer disk after first copy has been inspected.
Print Pages from List The resident pages of the printer.
Other Panel Language The Printer Control Panel language.
Resets Job Log and all print queue clearance (Clear
Log/Queues displayed)
Formatting the hard drive (Format Disk displayed)
Printer color calibration reset to factory settings (Reset
Color displayed)
Defaults of all modifiable settings (Restore Defaults)
Restart of the printer (Restart Printer displayed)
System Setup to
Network Services Setup
Information about the printer and to set a password to
limit access to printer Setup menus.
VisualCal Calibration of the printer color production.
Color Adjustment Adjustment of the density and brightness of Dry Ink.