Xerox Phaser 790 Documentation

19. Using Fiery Link
Xerox Phaser 790
19–8
Using My Fiery List of Fiery Link
1. Select the Phaser 790 button to access the My Fiery List.
2. Use My Fiery List to specify the printers you want to monitor using
Fiery Link.
3. Access a menu from the Windows taskbar status area to get
information about Fiery Link, set some Fiery Link options, or exit
the application.
4. Right-click the Fiery Link icon in the Windows taskbar status area.
5. Select one of the options from the drop-down list.
Options with checkmarks are enabled.
6. Select About Fiery Link for version information.
7. Select Always on Top to enable or disable the option.
If this option is enabled, the Fiery Link window always appears on
top of other open windows. If this option is disabled, the Fiery Link
window may be hidden by other open windows.
8. Select Dock Fiery Link to enable or disable the option.
If this option is enabled, the Fiery Link window is automatically
repositioned to either the far left or the far right side of your
screen. If this option is disabled, you can position the Fiery Link
window anywhere on the screen.
9. Select Exit to exit Fiery Link.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English