Xerox Phaser 790 Documentation

8. Setting up the network server
Xerox Phaser 790
8–13
Accessing the Fiery WebTools
1. Start the Internet browser.
2. Enter the IP Address or DNS name of the printer.
3. Press Enter.
The Fiery home page is displayed. Select the name of a particular
WebTool to use. For more information, refer to the chapter that is
specific to the tool.
4. Select the Configure button and enter required information to
restrict user access to certain WebTools.
Changing the WebLink destination
1. Start the Internet browser.
2. Enter the IP Address or DNS name of the printer.
3. Enter the Administrator password (if required) and select OK.
4. Press the Control key (Mac OS) or CTRL key (Windows) as you
select the WebLink button.
5. Enter the new WebLink address (URL) and select OK.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English