Replacing the Copy/Print Cartridge 24. Maintenance
Xerox Phaser 790 24-7
Replacing the Copy/Print Cartridge
Use this procedure when you are referred here from the Problem Solving
chapter, or when a message to change the Copy/Print Cartridge is displayed
on the Control Panel.
1. Place several sheets of used paper on the floor in order to protect the
floor from the old Copy/Print Cartridge.
2. Open the Front Cover.
3. Rotate the yellow lever A in the direction of the arrow, until the dot is
aligned with the Unlocked symbol.
301044
To Next Page
Loading...
