Xerox Phaser 790 Documentation

Xerox Phaser 790 24-1
Maintenance
Cleaning procedures
This section contains the recommended cleaning procedures for the Xerox
Phaser 790.
Cleaning the covers
The covers do not require cleaning. However, if you wish to clean the outside
covers, perform the following procedure.
WARNING
Always switch off the power and disconnect the power cord from the wall
outlet in order to avoid an electrical shock when cleaning the Phaser 790.
1. Moisten a clean cloth and wipe any stains from the covers.
2. Wipe dry with a clean dry cloth.
3. If the stains are still present, moisten a clean cloth with a solution of a
synthetic detergent.
4. Wipe dry with a clean dry cloth.
CAUTION
DO NOT spray cleaning liquid or water directly onto the Printer.
NEVER use any cleaner other than a synthetic detergent.
DO NOT clean the interior of the Printer.
NEVER attempt to lubricate the Printer.
24

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English