Xerox Phaser 790 Documentation

Xerox Phaser 790
20–1
Using Fiery WebSpooler
Fiery WebSpooler duplicates many of the functions and features of the
Command WorkStation. WebSpooler enables job tracking and
management from multiple platforms over the Internet or intranet.
Fiery WebSpooler, one of the Fiery WebTools, is accessed through an
Internet browser and the Fiery software home page.
The interface of the WebSpooler is similar to that of the Command
WorkStation. This chapter often refers you to the chapters Introduction
to the Command WorkStation and Managing print jobs at the
Command WorkStation for information about icons and commands that
are common.
Tracking and managing jobs with Fiery WebSpooler
You can use Fiery WebSpooler to perform the following functions from
your workstation:
• Override current job option settings
• Delete jobs and cancel processing
• Duplicate or rename jobs
• RIP a job and hold the raster data
• Hold jobs in the spooled area or the RIPped area
• Remove raster data from RIPped files
• Change the priority of jobs
• Display, print, or delete the Job Log
Most Fiery WebSpooler commands function identically to those of the
Command WorkStation. For more information on specific commands,
refer to the chapters Introduction to the Command WorkStation and
Managing print jobs at the Command WorkStation.
20

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English