Xerox Phaser 790 Documentation

14. Printing from the Windows workstations
Xerox Phaser 790
14–2
Printing from applications
Once you have installed the Phaser 790 printer driver and set it to the
proper port, you can print directly from most Windows applications.
Simply select the Print command from within your application.
Setting options and printing with Windows 95/98 and
Windows 2000
To print from Windows 95/98 and Windows 2000, use either the Adobe
PostScript printer driver or the PCL printer driver for Windows 95/98 or
Windows 2000. Both drivers are included with the Phaser 790 user
software.
Once you have installed the printer drivers and PDD files, you can
specify print settings for a particular job and print it
To print from Windows 95/98 or Windows 2000 applications by
connecting your computer to a print server via the network, one of the
following is required: a NetWare server, a Windows NT server, or a
UNIX server. Refer to the illustrations in the chapter Connecting to the
network.
To print from Windows 95/98 or Windows 2000 applications without
connecting to a print server, you can use SMB printing. Refer to the
appropriate chapter Installing user software for your system.
The procedures for setting options and printing are different depending
on which printer driver (PCL or PostScript) you use. Ensure that you
are using the correct procedures for your needs.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English