Xerox Phaser 790 Documentation

B. Print options
Xerox Phaser 790
B–5
CMYK Simulation Profile
SWOP-Coated/
DIC/Euroscale/Simulation-1/
Simulation-2/Simulation-3/
Simulation-4/Simulation-5/
Simulation-6/Simulation-7/
Simulation-8/Simulation-9/
Simulation-10/None
Specify the simulation goal to
be used for the current print
job.
For Windows, select Expert
Color as the Color Mode to
access this option.
More information follows this
table.
This option is not available for
PCL printing.
Electronic Collation
Off/On
Specify how to output multiple-
page/multiple-copy jobs.
More information follows this
table.
This option is not available for
PCL printing.
Color Mode
CMYK/Grayscale
(from the Mac OS driver)
OR
Standard Color/Expert
Color/Grayscale
(from the Windows drivers)
Specify the color mode for the
current print job.
Select CMYK, Standard
Color, or Expert Color for a
full-color document.
Select Grayscale for a
grayscale or black-and-white
document.
For Windows, you must
select Expert Color to set
other color print options,
including Pure Black Text/
Graphics.
This option is not available for
PCL printing.
Copies
1-999
Specify the number of copies
of the job to print.
Do not enter a value greater
than 999.
Duplex
Off/Long Edge Binding/Short
Edge Binding
Specify whether the job should
print one-sided or two-sided
(duplex), by specifying the
orientation of printed images.
The Duplex option cannot be
selected with the 12x18
Paper Size or the
Heavyweight Media Type.
Face-Down Printing must be
set to On and Page Order set
to Forward for all two-sided
jobs.
More information follows this
table.
Layout
1-up through 16-up
Select the Layout print bar and
the desired orientation. Select
the desired Layout setting to
place multiple pages on a
single sheet of paper.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English