B. Print options
Xerox Phaser 790
B–6
Media Type (Paper Type)
Plain Paper /Transparency/
Cover/Glossy/Coated/Labels/
Heavyweight/Card/Envelope/
Side 2 Plain Paper/Side 2
Cover/Side 2 Coated/Side 2
Glossy/Side 2 Heavyweight
Select Transparency if you will
be printing on transparencies.
Select Transparency
Interleave to print multiple
transparency sheets with a
blank, plain paper sheet
inserted between each
transparency.
PCL supports only Normal
and Transparency.
Mirror
On/Off
Select the Layout print bar and
the desired orientation. Select
the Mirror check box to print a
backward or mirror image of
the page or document.
Negative
On/Off
Select the Layout print bar and
the Negative check box to
reverse colors in printing.
Not available in Windows
NT 4.0
Orientation
Portrait/Landscape
Select the Layout print bar and
specify whether the job should
be printed long-edge feed
(portrait) or short-edge feed
(landscape).
The Printer default setting
reflects the setting specified
in Printer Setup
Output
Top Output Tray (Face-
Down)
Side Output Tray (Face-Up)
Select Off to print your
document on the top of the
paper.
Select On to print your
document on the bottom of the
paper (i.e., the document will
output from the copier with the
text facing down).
The Printer default setting
reflects the setting specified
in Printer Setup.
The Media Type option must
be set to Plain Paper or
Heavyweight if Face-Down
Printing is set to On.
This option is not available for
PCL printing.
Output Profile
Printer default/
Output-1/Output-2/
Output-3/Output-4/Output-5/
Output-6/Output-7/Output-8/
Output-9/Output-10
Specify the output profile to be
used for the current print job.
The Printer default setting
reflects the setting specified
in ColorWise Pro Tools.
For Windows, select Expert
Color as the Color Mode to
access this option.
More information follows this
table.
This option is not available for
PCL printing.
To Next Page
Loading...
Need help?
General
