7. Performing the setup from the Printer Control Panel
Xerox Phaser 790
7–14
3. If a password is required to login to the server, the File Servr
Login screen is displayed.
Use the up and down arrow buttons to view the list of options.
Press Item/Enter to accept an option.
4. When the Server Password screen is displayed, use the up and
down arrow buttons to enter the password.
5. When the Print Server screen is displayed, use the up and down
arrow buttons to scroll through the list of print servers defined for
the selected file server. After selecting a print server, press
Item/Enter.
If a password is required to log in, the PServer Password screen
is displayed. Use the up and down arrow buttons and press
Item/Enter to enter the password.
If fewer than eight file servers are connected, the Another FS?
screen is displayed. Select Yes to redisplay a list of available
servers. Select No to stop adding file servers and display the
POLL INT screen.
If the maximum number of file servers (eight) is connected, the
POSS INT (SEC) screen is displayed. Use the up and down
arrow buttons to specify the interval (from 1-999 seconds) at
which the printer communicates with the Novell Server. (15 is the
default interval.) If you select a short interval, the amount of
network traffic increases; this may slow down other network jobs.
Press Item/Enter.
To Next Page
Loading...
Need help?
General
