Xerox Phaser 790 Documentation

8. Setting up the network server
Xerox Phaser 790
8–5
Configuring NDS Connections
On the NDS File Server In Setup on the Command
WorkStation
At the client workstation
In NetAdmin:
Create NDS print queues
Create the NDS printer and
assign print queues
Create the print server and
assign the printer
Configure users of the Print
Queue
• Port Setup:
Ethernet Setup
• Protocol Setup:
IPX/SPX Setup—
select frame type(s)
• Service Setup:
PServer Setup and
NDS Setup
• Select Root
• Browse to select print
server
• Specify print queue search
root (optional)
• Set Polling Interval
Install user software
For printing:
Connect client to print queues
that you set up on the
NetWare File Server
(Associated with the Print
Server selected in NDS
Setup).
For running the Fiery utilities:
Configure the connection to
the printer.
Configuring a bindery connection
On the Bindery
File Server
In Setup on the Command
WorkStation
At the client workstation
In PConsole:
Select up to 8 NetWare File
Servers
For each File Server:
• Configure the print server
• Configure the print queue
• Configure the users of the
print queue
• Port Setup:
Ethernet Setup
• Protocol Setup:
IPX/SPX Setup—
select frame type(s)
• Service Setup:
PServer Setup and
Bindery Setup
• Add up to 8 file servers
• Set Polling Interval
Install user software
For printing:
Connect client to print queues
that you set up on the
NetWare File Server
(Associated with the Print
Server selected in Bindery
Setup).
For running the server utilities:
Configure the connection to
the printer.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English