9. Installing user software in a Windows 95/98 environment
Xerox Phaser 790
9–18
3. Browse for the printer name. Refer to the Configuration page for
this information. If you cannot locate your Phaser 790, see your
system administrator.
4. Double-click the name of the printer to display enabled print
connections.
5. Double-click the name of the desired printer connection.
The Printers dialog box is displayed, asking whether you would
like to set up the printer.
6. Select Yes to install the PostScript or PCL printer driver and
printer description file for the selected connection.
The Add Printer Wizard is displayed.
To Next Page
Loading...
