Xerox Phaser 790 Documentation

11. Installing user software in a Windows NT 4.0 environment
Xerox Phaser 790
11–5
The Install from Disk dialog box prompts you for the disk.
7. Perform one of the following:
• If you are installing from the CD, select the CD-ROM drive
(for example, D:\) from the drop-down box and select the
Browse button.
• If you are installing from files you downloaded using the
Installer WebTool, type the name of your hard disk drive (for
example, C:\) and select Browse.
8. Perform one of the following:
• If you are installing from the CD, browse to one of the
following folders:
• For PostScript printing:
English\Prntdrvr\PS_drvr\Win_NT4.x folder
• For PCL printing:
English\Prntdrvr\PCL_drvr\Win_NT4.x folder
• If you are installing from files you downloaded using the
Installer WebTool, browse to the Prntdrvr folder.
Select OK and ensure that Oemsetup.inf or Oemsetup is
selected.
The path is copied to the Install from Disk dialog box.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English