Xerox Phaser 790 Documentation

13. Installing the Fiery software for Windows and Macintosh
Xerox Phaser 790
13–16
4. Enter the appropriate information for the printer.
• Nickname—Enter a name for the printer. This name can be
any name you wish; it does not have to match the actual
printer name.
The nickname cannot contain any of the following seven
characters: [ ] _ ” ’ <space> <tab>
• Protocol—Select the type of network protocol (TCP/IP) you
are using from the drop-down list.
• Server Name—Enter the IP address (or DNS name) of the
Fiery.
• New Device—Enter the name of the device to which the
printer is connected.
5. After you have added all the information, select Add.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English