Xerox Phaser 790 - Page 291

14. Printing from the Windows workstations
Xerox Phaser 790
14–17
5. Select the Layout, ColorWise, Image Quality, and Finishing
print option bars to specify the appropriate settings for the print
job.
These print options are specific to the server and the printer. They
override settings specified in Printer Setup, but can be overridden
from the Command WorkStation Properties dialog box or in the
Fiery WebSpooler or Fiery Override Print Settings dialog box. For
more information on these and other print options, refer to the
chapter Print options.
If you select Printer default, the job prints according to the
settings entered during Setup, or the default settings. Refer to the
chapter Print options.
Some options can also be set from an application (for example, Reverse
Page Order or Collation). In these cases, use the driver option to perform the
function, rather than setting it from the application. The application may not
set up the file properly for printing on the Phaser 790 and may also take
longer to process.
6. Select OK.
7. Select OK again to close the Print dialog box.