15. Printing from the Macintosh OS workstations
Xerox Phaser 790
15–2
4. If the network is divided into zones, select the zone in which the
printer is located.
5. Select the printer by <Printer Name>_<Device Name>_<Queue
Name> from the Select a PostScript Printer list.
The names of all supported printers in the zone are displayed in
the scroll list on the right.
If your system administrator has not enabled the connection to
the Print queue or the Direct connection, the corresponding
names will not appear in this list. For example, if your site has an
operator who controls the flow of print jobs from the Command
WorkStation, you may be able to print only to the Hold queue.
6. Close the Chooser window.
The printer remains selected as the current printer until you select
a new printer in the Chooser.