Xerox Phaser 790

16. Introduction to the Command WorkStation
Xerox Phaser 790
16–3
Once the Phaser 790 receives print jobs, the Queues window becomes
a dynamic display, filled with the names of jobs and their
characteristics. Status bars animate in real time as new jobs are
processed and printed, and jobs move to different display areas. An
operator, who has complete job control, sets the process in motion for
each job.
The Spool, RIP, and Print areas of the Queues window represent the
stages of printing a job. Jobs come in at the top level (Spool) and drop
down to the Print level, unless they are held along the way.