Xerox Phaser 790 Documentation

16. Introduction to the Command WorkStation
Xerox Phaser 790
16–14
• Select the Fiery icon to view server information.
The Server information slider displays name and version
information about the currently connected server and the
Command WorkStation.
• Select the dial icon to open the Log in/out slider.
This slider is described in the section Logging in.
• Select the Tools icon to start a Fiery utility.
The Utilities Shortcut slider can be used to access ColorWise Pro
Tools. These utilities can also be accessed from the Job menu
and Server menu, respectively.
• Select the disk drive icon to view disk space and RAM
availability.
The System information indicators show the current availability of
RAM and hard disk space on the currently selected Fiery server,
including RAM currently in use, Total RAM, Disk space used, and
Total hard disk capacity.
To retract any slider, select the icon at the far right of the slider.

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English