Xerox Phaser 790 Documentation

16. Introduction to the Command WorkStation
Xerox Phaser 790
16–25
Print and Hold
(Like the user print
option Save Fast
Reprint)
Print the job in its turn (RIP it first if it does
not have raster data)
After printing, hold the PostScript data and
the raster in the RIP area.
Held in RIP area
indefinitely (saved to disk)
Process Next Give top priority to this job.
RIP (and then print) it as soon as the
processor is free, before other waiting jobs.
Option is dimmed if there are no other
waiting jobs.
n/a
This command is available
only for jobs in the Spool
area that are not currently
held.
Remove Raster Remove the raster data from a job that has
raster data (indicated by a raster icon); leave
the PostScript data unaffected.
Deleted
If you remove raster from a
job in the RIP area, the job
is sent to the Spool area.
Properties View, override print option settings, and print
a selected job or a group of selected jobs.
Possibly deleted and
regenerated, depending on
whether you change any
settings that require re-
RIPping.
Thumbnail A
Open a selected held job in the Thumbnail A
window where you can view a full-screen
preview of the job.
Unchanged
Thumbnail B Open a selected job in the Thumbnail B
window for viewing.
Unchanged
Download Download files and fonts to the printer with
WebTools. Refer to the chapter Using the
Fiery WebTools.
n/a
Archive Archive the selected held job(s) to the printer
hard disk, the internal ZIP drive, the local
Command WorkStation hard disk, or to a
device on the network and move the job icon
to the Archive window.
Archived with the job, if
archiving of raster data is
specified

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English