EasyManua.ls Logo

Adva 3000R7 - Page 119

Adva 3000R7
495 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MA-2C5LT
Supported aggregate
service data rates
l 4x10.3125 Gb/s (4x10GbE)
l 4x25.78125 Gb/s (4x25 GbE)
l 41.5 Gb/s (40 GbE)
l 4x10.709 Gb/s (4xOTU2)
l 4x11.0957 Gb/s (4xOTU2e)
l 4x28.05 Gb/s (4x32GFC)
See Pluggable Transceivers for a list of supported
pluggable transceivers and services.
Protocol 10GBASE-R (compliant to IEEE 802.3)
FEC No FEC
Mapper Mapped into OPU2e/ODU2e via bit-
synchronous mapping (BMP of CBR10G,
PT=0x03) (per G.798)
Loop functionality Terminal and facility loop
Table 54: 10 GbE Client
Protocol 25GBASE-R (compliant to IEEE 802.3)
FEC No FEC
Mapper apped into a 25.889,574 Gb/s ODUflex
(PT=0x80) (per G.798)
Loop functionality Terminal and facility loop
Table 55: 25 GbE Client
Protocol 40GBASE-R (IEEE 802.3)
FEC No FEC
Mapper Mapped into OPU3/ODU3 via generic
mapping procedure (GMP of CBR40G,
PT=0x07) (per G.798)
Loop functionality Terminal and facility loop
Table 56: 40 GbE Client
Protocol OTU2/OTU2e
FEC No FEC or G.709 GFEC
Mapper OTU2 -> ODU2(L) / OTU2e -> ODU2e(L)
(per G.798)
Loop functionality Terminal and facility loop
Table 57: OTU2/OTU2e Client
Protocol FC-3200 (ANSI FC-PI-6, FC-FS-4)
FEC No FEC
Mapper Mapped into a 28.167,857 Gb/s ODUflex
(PT=0x81) (per G.798)
Loop functionality Terminal and facility loop
Table 58: 32 G Fiber Channel Client
119 FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B

Table of Contents