Side Air Covers
Side Air Covers
The SH12 ships with side air covers installed or included in the shipment ready to install,
depending on your particular configuration. To determine if side covers are needed with
your configuration, see Accessory Installation Requirements. These figures show the
side air covers.
Figure 47: Side Air Covers for the SH12 — Exterior Surface
Figure 48: Side Air Covers for the SH12 — Reverse Side
The side air covers are marked with R for the right side panel and L for the left side panel
on the shelf. One side of the covers has a foam pad surface to prevent rattling when
mounted.
173 FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B