General Installation and Maintenance Guidelines
Chapter 40
Installation Safety Guidelines and
Warnings
General Installation and Maintenance Guidelines 467
Shelf Lifting and Moving Guidelines 468
Handling Equipment Precautions and Guidelines 469
Installation Instructions Warning 473
Rack-Mounting Requirements and Warnings 473
General Installation and Maintenance
Guidelines
To prevent equipment damage, adhere to these guidelines when you install and maintain
the HD equipment:
l Do not install a shelf in dusty environments or near equipment with strong
electromagnetic characteristics. In the latter case, external interferences might affect
the shelf operation.
l Mount the HD shelf in an approved rack that is fastened to a stable non-combustible
surface.
l Place equipment on a stable service. Any component can fall and break if placed on an
unstable cart, stand, or table.
l You must cover any empty slot in the shelf with a slot cover to maintain proper cooling
and maintain EMI compliance.
l Handle fiber with extreme care. Avoid mishandling optical fibers, as they can break
and permanent damage can result.
l Do not disassemble this product. Equipment can cease to function, and the warranty
is void if disassembled.
l Never install damaged equipment.
l Electrostatic Discharge Damage Prevention and Warning
l Handling Equipment Precautions and Guidelines
l General Site Requirements
l Supported Rack Requirements
467 FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B
To Next Page
Loading...