MP-2B4CT
Parameter Value Notes
Modes of operation
l Transponder (100G)
l Dual Transponder
(100G)
l Muxponder
(200G/300G)
l Dual Muxponder (200G)
Power consumption
(includes pluggable transceivers)
125 W Typical
145 W Maximum
Environmental standards
compliance
l Telcordia SR-3580 Level 3 (NEBS)
l ETSI EN 300 019-1-3 Class 3.1
l IEC 60529 IP20 (indoor office)
Table 62: General Information — MP-2B4CT
l Environmental Specifications
l MTBF Hours for HDEquipment
l Traffic Module Compatibility
l Slot Numbers and Assignments — SH12
l Slot Numbers and Assignments — SH4R
l Slot Numbers and Assignments — SH4R-2
l Slot Numbers and Assignments — SH1R
l Pluggable Transceivers
Features
l Two 100 Gb/150 Gb/200 Gb network DWDM interfaces
l Four 100 Gb Ethernet or OTU4 client interfaces
l Network Modulation: 100 Gb: DP-QPSK; 200 Gb: 16 QAM; 300 Gb: dual 150 Gb 8
QAM lanes
l Comprehensive fault and performance monitoring
l In-band ECC: 100 Gb network and OTU4 client
l Facility loopback supports on all external interfaces and terminal loopbacks on client
interfaces
l Compatibility with FSP 3000R7 100 Gb QPSK coherent modules when network is 100
Gb DP-QPSK with compatible FEC and a 100 GbE client
l Is field replaceable
l Interfaces
l Handling Modules
l Electrostatic Discharge Damage Prevention and Warning
FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B 124